Warrior General Games

Just want to make sure I'm interpreting it correctly.

If I have Max # set to 2, and have MLB, ROLB, LOLB set to Blitz Chance 100, the AI would randomly pick two of those and blitz them, yes?

Or if Max# is set to 2 and all three are at 50%, then it would go through and essentially roll a "yes/no" for each until it hits 2 (but potentially could send none if all land on no rolls).

Basically, yes.

YES, but iMO it is better to make more / different outputs....

I guess it is personal preference but I like to know for 100% sure what is going to happen on each output....
Like if you want no blitzers sometimes, just make a seperate output with no blitzers and assign a % straight to it, and make outputs for the different combinations of LB (at 100%) and assiggn the % to the output itself...

Anyhow thats just how I do it, I guess its a matter of preference...

PS ---- TAZ = sexay

One other thing, you need to make sure you do 1 of 2 things to ensure that your AI blitz settings work properly.


1) Enter "0" into all the blank boxes. This is the retarded way of doing it.
2) Set your basic AI Blitz % to 0. This is the smart way of doing it.


The reason for this, is that a blank box is NOT the same as 0%. A blank box follows the basic AI percentage. So, you could theoretically end up with a FS or SS or even a CB blitzing, if your basic setting is higher than 0%, and could end up with none of your LBs blitzing as a result.