I'm trying to figure out how to properly set this, so if once is blitzing, the other is in coverage, with no kinda strange limbo place on percentages, where, as an example, the LOLB and SS will both drop back in coverage, instead of one blitzing. I had previously been trying it at about 70/30, and the ROLB set to 100, with a total of max blitzers at 2... I'm wondering if setting LOLB and SS both at 99 with the 2 max blitzers might make it fire more accurately the way I want it to?
MustangLife
offline
offline
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
ZLM
offline
offline
Well, that's the assumption I had been going off of, as well... however, a play like this seems to imply otherwise: http://goallineblitz.com/game/replay.pl?game_id=396466&pbp_id=9391945
Seano
offline
offline
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
Last edited Mar 13, 2009 19:27:49
Forbin
offline
offline
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ZLM
offline
offline
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
Ahh. Alright. That does make sense. I'll give that a go. Thanks.
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
Ahh. Alright. That does make sense. I'll give that a go. Thanks.
seanb1979
offline
offline
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Forbin
offline
offline
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
seanb1979
offline
offline
Originally posted by Forbin
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
My basic % is at 100%. If you set who you want at 100%, lets say 2 linebackers, and set max blitzers to two, have you really seen it blitzing people other than those guys, like corners and safeties? I never have.
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
My basic % is at 100%. If you set who you want at 100%, lets say 2 linebackers, and set max blitzers to two, have you really seen it blitzing people other than those guys, like corners and safeties? I never have.
Forbin
offline
offline
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
My basic % is at 100%. If you set who you want at 100%, lets say 2 linebackers, and set max blitzers to two, have you really seen it blitzing people other than those guys, like corners and safeties? I never have.
Yes, if you don't fill in every box with a 0, you will occasionally get some random blitzer. (Rarely, but it DOES happen)
Originally posted by Forbin
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
My basic % is at 100%. If you set who you want at 100%, lets say 2 linebackers, and set max blitzers to two, have you really seen it blitzing people other than those guys, like corners and safeties? I never have.
Yes, if you don't fill in every box with a 0, you will occasionally get some random blitzer. (Rarely, but it DOES happen)
smittdog101
offline
offline
Originally posted by Forbin
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
My basic % is at 100%. If you set who you want at 100%, lets say 2 linebackers, and set max blitzers to two, have you really seen it blitzing people other than those guys, like corners and safeties? I never have.
Yes, if you don't fill in every box with a 0, you will occasionally get some random blitzer. (Rarely, but it DOES happen)
It does happen, unless every AI output you have has at least 1 blitzer. If you have plays with 0 blitzers in AI (and no 0's filled in), but a percentage in basic, it will blitz a random guy that percentage of the time.
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by seanb1979
Originally posted by Forbin
Originally posted by Seano
Originally posted by MustangLife
If you want 1 out of the 2 to blitz (LOLB and SS) than you need to set them to 50 each. And if you want to blitz the ROLB the whole time you need to keep that at 100. Set the max number of blitzers to 2. This will fire SS/ROLB one play and the next play will be LOLB/ROLB
This is actually not correct, even though it makes sense.
To do what you want you need two outputs, Max blitzers 2 and ROLB 100% in both, LOLB 100% in one of them and SS 100% in the other.
EDIT: The most accurate way to control your blitzing is set blitz %'s to 100's and 0's, and change your output %'s. Also make sure you have 0's in unused blitz %'s. Unless you do this it reverts back to your basic settings.
It's much easier to simply set the basic AI to blitz 0%. Sure as hell beats filling in every single blank with a 0...
ive never had an issue with unwanted blitzers.... i just specify the number of blitzers i want, set the guys i want to 100%, and its done
Then you're either very lucky, have missed the plays where it messed up, or you already have your basic percentage set to 0%.
My basic % is at 100%. If you set who you want at 100%, lets say 2 linebackers, and set max blitzers to two, have you really seen it blitzing people other than those guys, like corners and safeties? I never have.
Yes, if you don't fill in every box with a 0, you will occasionally get some random blitzer. (Rarely, but it DOES happen)
It does happen, unless every AI output you have has at least 1 blitzer. If you have plays with 0 blitzers in AI (and no 0's filled in), but a percentage in basic, it will blitz a random guy that percentage of the time.
You are not logged in. Please log in if you want to post a reply.
